Home > Products > Water Heaters With Coil & Storage Tanks > Heat Pump Boiler(WHP)
Heat Pump Boiler(WHP)
It is produced in full compliance with EN 12897: 2006 standards.
- Low carbon steel non - enamel (enamel -optional)
- Electrostatic painted galvanized steel frame
- Cathodic Protection Magnesium Anode
- 30-60 mm Polyurethane insulation
- Serpentine exchanger
- Standart electric heater input for heating backup
- UV Resistant polyurethane,galvanize steel covers
- Control Panel(Optional)
|
MODELS |
WHP150 |
WHP200 |
WHP300 |
|||
|
CAPACITY(lt) |
150 |
200 |
300 |
|||
|
OUTER DIAMETER(mm) |
540 |
600 |
540 |
600 |
540 |
600 |
|
HEIGHT(mm) |
1000 |
1200 |
1800 |
|||
|
HOT WATER OUT |
1” |
1” |
1" |
|||
|
HEATER INPUT |
1” |
1” |
1” |
|||
|
HEATER OUTPUT |
1” |
1” |
1” |
|||
|
CURCILATION |
3/4" |
3/4" |
1" |
|||
|
COLD WATER INLET |
1” |
1” |
1" |
|||
|
SERPENTINE AREA(m²)
|
1,6 |
2 |
3 |
|||
|
PU INSULATION(42 kg/m3) |
30mm |
60mm |
30mm |
60mm |
30mm |
60mm |
|
CLEANING FLANGE |
Optional |
Optional |
Optional |
|||
Contact Form
Please contact for more detailed information.