Enamel-coated boilers, which heat the energy coming from 2 heat sources of the boiler through the serpentine, offer clean hot water.
Manufactured in full compliance with EN 12897 :2016+A1 Standards
- Serpentine heat exchanger
- 30 millimeter thickness CFC-Free polyurethaneinsulation
- Enamel coating on low carbon steel
- Electrostatic painted galvanized steel body
- UV resistant polyethylene, galvanized steel covers
- Magnesium anode protection
- Standard electric heater input for heating backup
- Control panel (Optional)
| BOILER MODELS |
ECO100 |
ECO120 |
ECO150 |
ECO170 |
SRP200 |
SRP300 |
SRP500 |
| CAPACITY (L) |
100 |
120 |
150 |
170 |
200 |
300 |
500 |
| OUTER DIAMETER |
440 |
500 |
440 |
500 |
440 |
500 |
440 |
500 |
540 |
600 |
540 |
600 |
740 |
| HEIGHT (mm) |
1000 |
1250 |
1450 |
1600 |
1200 |
1800 |
1750 |
| HOT WATER OUT |
3/4" |
3/4" |
3/4" |
3/4" |
3/4" |
1" |
1" |
| HEATER INPUT |
1" |
1" |
1" |
1" |
1" |
1 1/4" |
1 1/4" |
| HEATER OUTPUT |
1" |
1" |
1" |
1" |
1" |
1 1/4" |
1 1/4" |
| CIRCULATION |
- |
- |
- |
- |
- |
1" |
1" |
| COLD WATER INLET |
3/4" |
3/4" |
3/4" |
3/4" |
3/4" |
1" |
1" |
| ELEKTRİC HEATER |
1 1/4" |
1 1/4" |
1 1/4" |
1 1/4" |
1 1/4" |
1 1/4" |
2” |
| 1.SERPENTINE SURFACE AREA (m²) |
0,6 |
0,6 |
0,6 |
0,6 |
0,9 |
1,2 |
2,2 |
| 2.SERPENTINE SURFACE AREA (m²) |
- |
- |
0,6 |
0,6 |
0,6 |
0,9 |
1,4 |
| CLEANING FLANGE |
- |
- |
- |
- |
✓ |
✓ |
✓ |
| External Casing |
* Case: Colorcoated® galvanized steel, coated with transparent folio for protection during transport
* Caps: ABS plastic or Colorcoated galvanized steel |
| Tank body Material (mm) |
Low carbon steel 3 mm |
Low carbon steel 3 mm |
Low carbon steel 3 mm |
Low carbon steel 3 mm |
Low carbon steel 3 mm |
Low carbon steel 3 mm |
Low carbon steel 4 mm |
| Serpantine Material (mm) |
Low Carbon Steel tube |
| Tank Internal Protection |
Enatech porcelain Enamel coating 200-400 micrones |
| Cathodic Protection |
Magnesium anode rod |
| Test pressure (bar) |
Body : 9 bar |
| Serpantine : 9 bar |
| Insulation (mm) |
Polyurethane injection (42 kg/m3) |
